Van der Valk | ValkPro+ | Galvanised ballast holder L10° | 2379mm

ValkPro+ Galvanised ballast holder

Van der Valk’s ValkPro+ galvanised ballast holder is used to hold ballast for weighing down PV systems. Place gravel or bricks in the ballast holder and lay it across the ValkPro+ roof rails under the panels. The ballast holder is suitable for both commercial and residential flat roofs. The VDV742556 has a length of 2379mm and is suitable for L10 degree South and East-west arrays.

ValkPro+

The Van der Valk ValkPro+ PV mounting system is available in East-west and South-facing configurations and can be installed at a tilt angle of 10 degrees. The system can be used for both landscape and portrait arrays. Taking only three minutes per panel to assemble, the ValkPro+ is very quick and easy to install in your chosen configuration. The ValkPro+ has preinstalled metal connectors for earthing and lightning protection systems. The system only requires the minimum of ballast and is also suitable for 2 metre-long and high power panels.