Van der Valk | Extension set | Solar ramp | 1010-1046mm

Van der Valk Extension set for solar ramps

To use solar panels of 1065 to 1134mm in combination with the ValkDouble and ValkTriple series, or panels of 1065 to 1100mm with the ValkQuattro series, the rails must first be extended. One extension set is required for each solar ramp. Note! Two holes must be drilled manually into the side of the extension rails for the ValkTriple and ValkQuattro. The VDV757050 is suitable for solar ramps with a panel width of 1010-1046mm.

ValkDouble, ValkTriple and ValkQuattro

Van der Valk’s ValkDouble, ValkTriple and ValkQuattro series are suitable for landscape configurations with two, three or four solar panels and meet European standards. The ValkTriple is ideal for garages and storage units while the ValkQuattro is suitable for apartment buildings. The ValkDouble is suitable for both types of buildings. All three systems can also be installed on the ground. The Double, Triple and Quattro are supplied complete with universal middle and end panel clamps (H = 28-50mm) and have a relatively low profile due to the small tilt angle of 10 degrees. The Double and Triple are suitable for solar panels of 1800 x 1100mm. An additional extension kit is available for panel widths of up to 1134mm. The Quattro is suitable for solar panels of 1800 x 1005mm. An additional extension kit is available for panel widths of up to 1100mm.